Monday, 25 November 2019

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 196

- Voltage[8,5...16,4] V


- Is the measurement value OK?


The measurement value is OK.Possible cause of fault

- The conductors in the electrohydraulic control unit are interrupted.

- Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.

Possible remedy

- Replace component Y3/8 (Electric control unit (VGS)).

Following the repair measures, the following checks MUST be carried out using the Diagnosis Assistance System, menu 'Initial startup'

- Initial startup with manual settings input for new control unit

No comments:

Post a Comment